SMC Networks Barricade SMC2804WBRP-G - Manual (Page 31)

Barricade g Wireless Router with USB Print Server Manual
8.5.2 | Special Applications
This section allows you to configure dynamic port forwarding rules by using an outgoing trigger
port.
Trigger Port: Enter in the outgoing port that will be used to open the public ports
Trigger Type: Choose the protocol type, TCP or UDP traffic.
Public Port: Set the Incoming Range of ports that will be opened by the outgoing trigger port data.
The maximum range that you can use for all NAT ports is 0 to 65535.
Public Type: Choose the protocol type, TCP or UDP traffic.
Enabled: You can enable or disable these rules as needed.
NOTE: For security, if you are not using a Special Applications rule, it is recommended that you
disable the rule until needed.
Need Port Info?
For a list of the ports required by some of the popular online games and other applications
please refer to Appendix C | SMC Port List for Games and Applications.
31