Sharp XG-C430X - Manual (Page 53)

-51
Useful Features
Helpful Functions Set during Installation (“Options2” menu)
Menu operation Page 42
1 1 1 1 1 Setting a Password
If you do not want others to change the setting
for the “Options2” menu, set a password.
1
Select “Password”, then press |
| | | |.
• The screen for entering the password is displayed.
2
Press '
' ' ' ' or " " " " " to set the first digit in
“New Password” and then press |
| | | |.
3
Enter the remaining 3 digits and
press
ENTER.
4
Enter the same password in “Re-
confirm” and press
ENTER.
Note
• Once the password is set, you must enter the
password to change the “Options2” menu set-
tings.
Changing the Password
1
Select “Password”, then press |
| | | |.
• The screen for entering the password appears.
2
Enter the password in “Old Pass-
word” using '
' ' ' ', " " " " ", | | | | | and \ \ \ \ \, then
press ENTER.
3
Enter the password in “New Pass-
word” using '
' ' ' ', " " " " ", | | | | | and \ \ \ \ \, then
press ENTER.
4
Enter the same password again in
“Reconfirm” using '
' ' ' ', " " " " ", | | | | | and \ \ \ \ \,
then press ENTER.
Note
• If you do not need the password protection for
the “Options2” menu settings anymore, press
ENTER without entering a new password in
steps 3 and 4.
• To cancel the password settings, press RE-
TURN.
If You Forget Your Password
If you forget the password, perform the following
procedure to delete it, then set a new password.
On the projector, press:
Note
• If ENTER is held down for more than 5 seconds,
the operation buttons on the projector will be locked.
(See page
50 .)
• You cannot use the buttons on the remote control to
delete the password.
Options2
Password
Speaker
Audio Out
PRJ Mode
Fan Mode
Monitor Out
LAN/RS232C
RS-232C
DHCP Client
TCP/IP
MAC Address
Projector
All Reset
COMP.1
Disable
On
FAO
Front
Normal
Enable
Enable
9600 bps
On
08:00:1F:B1:B7:74
MYPROJECTOR
SEL./ADJ.
RETURN ENTER
END
.
1
2
3
4
5
6
7
8
9
0
q
w