Sharp XG-C430X - Manual (Page 37)

-35
Basic Operation
Adjusting the Volume
Press / VOL on the projector or / VOL
on the remote control to adjust the volume.
Note
• Pressing or VOL will lower the volume.
Pressing or VOL will raise the volume.
Displaying the Black
Screen and Turning Off the
Sound Temporarily
Press AV MUTE on the remote control to tem-
porarily display a black screen and turn off the
sound.
Note
• Pressing AV MUTE again will turn the pro-
jected image and sound back on.
Displaying an Enlarged
Portion of an Image
Graphs, tables and other portions of projected
images can be enlarged. This is helpful when pro-
viding more detailed explanations.
1
Press ENLARGE on the remote
control.
• Enlarges the image.
• Pressing or ENLARGE enlarges or
reduces the projected image.
Note
• You can change the location of the en-
larged image using ', ", \ and |.
2
Press RETURN on the remote
control to cancel the operation.
• The magnification then returns to ×1.
Note
In the following cases, the image will re-
turn to the normal size (×1).
• When switching the INPUT mode.
• When RETURN has been pressed.
• When the input signal is changed.
• When the input signal resolution and refresh
rate (vertical frequency) change.
• When RESIZE has been pressed.
Freezing an Image
1
Press FREEZE on the remote control.
• The projected image is frozen.
2
Press FREEZE again to return to
the image from the currently con-
nected equipment.
"On-screen Display
RESIZE button
MOUSE/Adjustment
buttons ('/"/\/|)
RETURN
button
FREEZE
button
ENLARGE
(Enlarge/Reduce)
buttons
AV MUTE button
Volume buttons
"On-screen Display
Ч1 Ч2 Ч3 Ч4 Ч9 Ч16 Ч36 Ч64
Press
.
Press
.