Samsung Digimax 300 - Manual (Page 58)

58
A beep will sound when you press the camera button
and you can check the camera conditions.
Rotate the mode dial to the SETUP mode, allowing you to set up the basic camera settings.
1. Select the SETUP mode by rotating the mode dial.
2. [SETUP 1/2] menu will be displayed.
3. Select [BEEP] by pressing the UP( )/ DOWN ( )
button.
4. Press the SET( ) button and the sub menu will be
displayed.
5. Press the UP( )/ DOWN ( ) button and select
[ON] or [OFF]. Press the SET( ) button to confirm
the setting.
6. The default is [ON].
Starting the SETUP mode
SETUP 1/2
BEEP ON
POWER OFF 10 MIN
DATE IMPRINT ON
DATE TYPE YMD
MOVE PAGE:
SETUP 1/2
BEEP ON
POWER OFF 10 MIN
DATE IMPRINT ON
DATE TYPE YMD
CHANGE:
SETUP 1/2
BEEP
ON
OFF
EXIT:MENU SET:
Beep