Samsung Digimax 300 - Manual (Page 26)

26
Inserting the SD memory card
The camera comes with 16MB of internal flash memory, allowing you to store images and movie
clips in the camera. However, you can expand the memory capacity by using an optional SD
memory card([CARD] stands for the SD memory card) so that you can store more images and
movie clips.
The CARD has a write protect switch that
prevents image files from being deleted or
formatted. By sliding the switch to the bottom of
the card, the data will be protected. By sliding the
switch to the top of the card, the data protection
will be canceled. Check the switch position before
taking an image.
1. Turn off the camera power and pull the card cover in
the direction of the arrow to open.
2. Insert the card all the way into the card slot. The card
pins and the LCD monitor should face in the same
direction. The card will be fitted.
3. To close, push the card cover toward the arrow until
you hear a click.
Once the CARD is inserted, the SD memory card
indicator will appear on the LCD monitor.
If the CARD does not fit, check that it is inserted
correctly. Do not force the card.
Insert the Multi Media Card(MMC) in the same way as the SD memory card is inserted.
Should you insert the Multi Media Card in the opposite direction, it may still slide in, but
part of it will project from the slot and it will not fit correctly. Do not force the card and don't
close the battery chamber cover. Check the directions and re-insert the card correctly.
NOTICE
SD(Secure Digital) memory card
Write protect
switch
Label
Card pins