Samsung Digimax 300 - Manual (Page 27)

27
READY
Removing the SD memory card
1. Turn the power off using the power switch.
2. Open the card cover and press the CARD as shown in
the image and release.
3. Remove the CARD and close the card cover.
Don’t remove the CARD when the camera status LED(green) is blinking as this may
cause damaged data in the CARD.
NOTICE
Instructions on how to use the SD memory card
Before using the CARD, it must be initialized.
Initializing prepares the memory for recording data.
Refer to page 54 for information on [FORMAT].
Using a new CARD for the first time
When using a 16MB internal memory, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance). These figures are
approximate as image capacities can be affected by variables such as subject matter.
Memory capacity
Recorded image size Super fine Fine Normal
2048X1536 ( ) 14 28 42
1600X1200 ( ) 22 46 64
1024X768 ( ) 46 97 139
640X480 ( ) 121 244 488