Samsung Digimax 300 - Manual (Page 45)

PLA
Y
45
Starting the Play Mode
Turn the camera on and select the PLAY mode by rotating the mode dial. The camera can now
play back the images stored in the memory.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
1. Slide the power switch to turn on the camera.
2. Select the PLAY mode by rotating the mode dial.
3. The last image stored on a memory is displayed on
the LCD monitor.
4. Select an image that you want to play back by
pressing the UP( ) / DOWN( ) button.
Playing back a still image
Keep the LEFT/ RIGHT button pressing and the
images are shown rapidly.