Samsung Digimax 300 - Manual (Page 2)

2
Use this camera in the following order
Instructions
Insert the
USB cable
Set up the
camera driver
Before connecting the camera to a PC, via the USB
cable, you will need to set up the camera driver.
Install the camera driver that is contained in the
Application S/W CD-ROM.(p.76)
Take a picture (p.30~44)
Insert the supplied USB cable into the PC USB port
and the camera USB connection terminal.(p.66)
Check the camera power. If the power is turned off,
slide the camera switch to power it on.(p.32)
Take a picture
Check the
camera power
Check
[Removable Disk]
Open Window’s EXPLORER and search for
[Removable Disk].(p.67)