Sanyo MM-7400 - Manual (Page 156)

Making a Sprint PCS Ready Link Call (1-to-1 Call)
You can place a 1-to-1 Sprint PCS Ready Link call by entering a
Sprint PCS Ready Link number or by selecting a contact from the
Sprint PCS Ready Link List.
To place a Sprint PCS Ready Link call by selecting a contact:
1. Press R-Link (left softkey) or press .
2. Press Go to (left softkey), highlight the list from which you want
to place a call (Company List, Personal List, Outgoing, Incoming, or
Missed), and press
.
Tip: You can also select Enter R-Link# from the Go to option to enter a Sprint PCS
Ready Link number directly. (See page 145 for details.)
3. Scroll to the contact you want to call, and press and hold to
place the call and get the floor. (You will see R-Link calling... and
Connecting... followed by “You have floor.” You can now begin
speaking.)
– or –
Scroll to the contact you want to call and press and release
to place the call. (The call will connect as described above, but
“Floor is open.” will appear on the screen and either you or your
contact may press and hold
to take the floor and speak.)
Note: During a Sprint PCS Ready Link call, the “ floor ” is the right to speak. When
you see “ Floor is open. ,” the first person to press the Ready Link/Memo button
( ) can speak (while holding the button). Only the person who has the floor can
speak. The phone beeps if you press when another contact has the floor.
4. Continue holding as you speak. (When you are finished
speaking, release to allow the other contact to speak.
When the other party takes the floor, you will see the speaker’s
name and phone number and the text “has floor.”)
5. When you are finished, press .
Note: When neither party has the floor during a Sprint PCS Ready Link call,
“ Floor is open. ” appears on the display. If no one takes the floor for 20 seconds,
the Sprint PCS Ready Link call ends automatically.
Tip: If you press or during step 3 above, you can make a standard
voice call.
Section 2J: Using Sprint PCS Ready Link 143