Asus P4B-E - Manual (Page 43)

ASUS P4B-E motherboard user guide 2-21
5. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the
computer when you press a key on the keyboard (the default is the
Space Bar). This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the
BIOS (see section 4.5.1 Power Up Control). The default is setting is on
pins 2-3 (+5VSB).
Figure 2-26 Keyboard Power Settings
®
P4B-E
P4B-E Keyboard Power Setting
+5V +5VSB
KBPWR
1
2 2
3
(Default)
6. Speaker selector (3-pin SPEECH) (on audio models only)
This jumper allows you to select the speaker you wish to use for the
ASUS POST Reporter™ function. Set to pins 1-2 to use the internal
speaker (usually included in the chassis). Set to pins 2-3 if you
connected an external speaker to the Line Out jack (lime color) on the
rear panel.
Figure 2-27 Speaker Selection Settings
®
P4B-E
P4B-E Speaker Selector
SPEECH
SPEAKER
(Default)
LINE_OUT
2 3 1 2