Samsung SV-DVD54T - Manual (Page 8)

ENG-7
Inserting Batteries in the Remote
Control
You must insert or replace the batteries in the remote
control when you:
◆ Purchase the STB-DVD-VCR
◆ Find that the remote control is no longer
working correctly
1 Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
2 Insert two AAA, RO3 or equivalent batteries,
checking for polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
➢
Use same types of batteries
1
Display Indicators
10 8 9
7
1 The DVD Deck is active.
2 A DVD, CD is loaded
3 The time, counter position, time remaining or
current deck status is displayed
4 VHS tape is inserted
5 The VCR Deck is active
6 3D sound
7 DTS disc
8 STEREO indicator
9 REC Mode
10 A Timer Recording is programmed or in progress.
1 2 3 4 5
6
TV
1
Connecting STB-DVD-VCR to
the TV using the RCA Cable
You can connect your STB-DVD-VCR to the television
using the RCA cable if any appropriate Line input is
available on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your
STB-DVD-VCR
☛
Make sure that both the television and the STB-
DVD-VCR are switched off before connecting
the cables.
1 Connect the aerial RF cable to ANT.IN on the rear
of your STB-DVD-VCR.
2 Use the RCA Audio/Video cable to connect the
STB-DVD-VCR and the TV receiver.
3 Use LINE OUT on the STB-DVD-VCR and LINE IN
on the TV.
3
2