Samsung SV-DVD54T - Manual (Page 14)

ENG-13
Clearing a Preset Station
☛ If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons to select
the Install option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
Install
38
4 Press the corresponding or
❷ buttons, until the
Manual Setup option is selected.
5 Press the OK or ❿ to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or ❷ buttons, until the
required preset TV station (PR) is selected.
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
9 On completion, press the RETURN button four
times to exit the menu.
PR CH NAME
1
2
3
4
5
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR
RETURN
Changing the Preset Station Table
You can rearrange the Station Table and give different
programme numbers to the stations listed according to
your own preferences.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons to select
the Install option.
3 Press the OK or
❿
buttons to select this option.
Result: The Install menu is displayed.
PR CH NAME
1 27
2
3
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR
RETURN
PR CH NAME
1
2
3 27
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR
RETURN
Auto Setup
Manual Setup
Install
38
4 Press the corresponding or ❷ buttons, until the
Manual Setup option is selected.
5 Press the OK or ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or ❷ buttons, until the
required preset TV programme is selected.
Result: The selected station is displayed at the
same time on the television screen.
7 To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
8 Press the or ❷ buttons to select required
position. And then press OK again to swap the
position.
9 On completion, press the RETURN button four
times to exit the menu.