Samsung SV-DVD54T - Manual (Page 28)

ENG-27
Using the TV Buttons on the Remote Control
Your STB-DVD-VCR remote control will work with
Samsung televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1 Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01 to 06 PHILIPS 02, 20, 22
AKAI 09, 23 SABA 13, 14, 22 to 24
GRUNDIG 09, 17, 21 SONY 15, 16
LOEWE 02 THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21
Result: If your television is compatible with the
remote control, it will switch off. It is now
programmed to operate with the remote
control.
➢
If several codes are indicated for your
television brand, try each one in turn until you
find one that works.
Button Function
TV STANDBY/ON Used to switch the television on
and off.
TV or VCR Used to switch between the TV and
VCR modes.
INPUT SEL. Used to select an external source.
TV VOL + or – Used to adjust the volume of the
television.
PROG Used to select the required
( or ) programme.
MUTE Used to mute the volume of the
TV.
➢
The various functions will not necessarily work
on all televisions. If you encounter problems,
operate the television directly.
➢
TV/VCR Key of remote controller does not
operate.