Sharp HT-CN400DVH - Manual (Page 52)

E-45
HTCN400_500DVH_E.fm 03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
HT-CN500DVH
Ad
v
a
nced
F
e
atures
- Ad
ju
st
in
g
sp
e
ake
r d
e
la
y t
ime
/sp
e
a
ker
le
vel
-
Adjusting speaker delay time/speaker level
When speakers cannot be placed at equal distances, change speaker settings to
enjoy surround effects as if they were equally placed.
Example:
If the centre speaker is closer to the listening position than others by about 90 cm, set
as follows.
! Speaker delay time setting
By adjusting speaker delay time, differences in the speaker distance can be cor-
rected. This offers you the sound quality as if the speakers are installed at the same
distance from the listening position.
Notes:
" When the listening mode is "STEREO", the delay time cannot be changed.
" You cannot change the delay time of the front speakers and the subwoofer.
" In the "REAR DELAY" setting, the left and right speakers are adjusted at the same
time, not individually.
Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1
ms corresponds to 30 cm. Set the delay time to 3 MS. Sound is heard as if all the
speakers were equally placed.
1 In "Speaker delay time setting", set the centre speaker to 3 MS.
2 The centre speaker is closer to the listener than others. In "Speaker level set-
ting", adjust the centre speaker level (see page 46).
3 In "Test tone", check the sound from each speaker (see page 46).
110 cm
200 cm
0 90 cm
Front
speaker (left)
Subwoofer
Front
speaker (right)
Surround
speaker (left) Surround
speaker (right)
Centre
speaker
PRESET
ADJ/VOL
ENTER
SLEEP
ST/MO
TUNING
DISPLAY LANGUAGE
MUTE
PROG
MENU/PBC
LISTENING
SLOW/MEMORY
TITLE
MODE
SUBTITLE
SET UP
OPEN/ CLOSE ON/ STAND-BY
MODE
SET UP
ENTER
ADJ/VOL
ON/
STAND-BY
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD button.
3
Press the SET UP button.
4
Press the or button to select
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the or button to select
"CNTR DELAY" or "REAR DE-
LAY".
6
Press the button and use the
or button to select the desired
delay time.
7
To complete the speaker delay time setting, press the SET UP but-
ton.
Speaker type Delay time range Default
setting
CNTR DELAY Centre speaker 1 MS to 5 MS OFF
REAR DELAY Surround speaker (L, R) 3 MS to 15 MS OFF
SETUP MENU -- MAIN PAGE
AUDIO SETUP
PREFERENCES
GENERAL SETUP
SPEAKER SETUP
-- SPEAKER SETUP PAGE --
MAIN PAGE
CNTR DELAY
1MS
3MS
5MS
TEST TONE
OFF
REAR DELAY
-- SPEAKER SETUP PAGE --
OFF
MAIN PAGE
CNTR DELAY
TEST TONE
REAR DELAY
1MS
3MS
5MS