Sharp HT-CN400DVH - Manual (Page 25)

E-18
HTCN400_500DVH_E.fm 03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Pr
epara
tion f
o
r Us
e
- Cha
nging the
s
e
tup me
n
u
-
Setup menu Selectable parameters (* indicates default settings.) Description
GENERAL SETUP TV DISPLAY NORMAL/PS The screen mode should be set according to the connected TV
type (for details, see page 20).
NORMAL/LB *
WIDE
TV TYPE MULTI * Selects the correct colour system (TV standard) (for details, see
page 20).
NTSC
PAL
VIDEO OUTPUT S-VIDEO Video signals are switched according to the connected cable (for
details, see page 20).
SCART *
OSD LANG ENGLISH * You can select the desired OSD (On Screen Display) language for
the setup menu or playback control screen.
FRENCH
GERMAN
ITALIAN
SPANISH
SCR SAVER ON A screensaver appears.
OFF * The screensaver is disabled.
SPEAKER SETUP CNTR DELAY 1 MS to 5 MS Adjust the delay time of the speakers (for details, see page 45).
OFF *
REAR DELAY 3 MS to 15 MS
OFF *
TEST TONE ON You can check the sound output from the speakers (for details,
see page 46).
OFF *
AUDIO SETUP DYNAMIC (*1) FULL * Audio with fully compressed dynamic range.
7/8 Audio with partially compressed dynamic range.
1/8
OFF Audio with uncompressed dynamic range.
-- GENERAL PAGE --
TV TYPE
MAIN PAGE
GENERAL SETUP
VIDEO OUTPUT
OSD LANG
SCR SAVER
TV DISPLAY
WIDE
NORMAL/PS
NORMAL/LB
-- SPEAKER SETUP PAGE --
REAR DELAY
MAIN PAGE
LOUD SPEAKERS SETUP
CNTR DELAY
TEST TONE
1MS
3MS
5MS
OFF
-- AUDIO SETUP --
MAIN PAGE
AUDIO RELATED
4/8
6/8
FULL
2/8
OFF
DYNAMIC
(*1)
Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.