Battery installation, Turning the power on, Test of the remote control – Sharp HT-CN400DVH User Manual
Page 23
E-16
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Pr
epara
tion f
o
r Us
e
- Bat
te
ry
inst
a
llat
ion / T
u
rn
in
g
th
e
po
w
e
r
o
n
-
Battery installation
Precautions for battery use:
"
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
"
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Incorrect installation may cause the unit to malfunction.
Notes concerning use:
"
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
"
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
"
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
"
Keep the remote control away from moisture, heat, shock, and vibrations.
Turning the power on
!
Test of the remote control
Check the remote control operation after making all the connections (see pages 11 -
14).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your
system.
!
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check the AC power lead is plugged in properly.
To set the unit to the stand-by mode:
Press the ON/STAND-BY button again.
The power stand-by indicator lights up.
1 Open the battery cover.
2 Insert the supplied batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
3 Close the cover.
ENTER
ST/MO
DISPLAY
LANGUAGE
MUTE
MENU/PBC
TITLE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
Remote sensor
0.2 m - 6 m
(8" - 20')
ON/
STAND-BY
Power stand-by indicator
5
S
H
A
R
P
9
2LC
N
4
00
E
0
27
0