Sharp MD-MT20H - Manual (Page 29)

1 2
28
■ Move
1
Play the track to be moved, and press
the
06
button.
● The unit will enter the pause mode.
2
Press the EDIT button to select “MOVE”.
3
Press the ENTER/SYNC button.
● To cancel the operation, press the
■ /:OFF button.
4
Press the
5
or
4
button to select
the direction to move.
● To increase the track number ....
4
● To decrease the track number ....
5
5
Press the ENTER/SYNC button again.
● The track will be moved, and the unit
will be paused at the beginning of the
track.
Note:
● When a track has been moved, the other
tracks which are affected by the move
will be assigned new track numbers au-
tomatically.
Example:
When moving the fifth track to the third
track, the old third track will become the new
fourth track and the old fourth track will be-
come the new fifth track.
■ Divide
1
Start playing the track you want to di-
vide into two. Press the
06
button at
the point where you want to divide the
track.
● The unit will enter the pause mode.
2
Press the EDIT button to select “DI-
VIDE”.
3
Press the ENTER/SYNC button.
● To cancel the operation, press the
■ /:OFF button.
4
Press the ENTER/SYNC button again.
● The track will be divided into two
tracks, and the unit will be paused at
the beginning of the second of the two
tracks.
● The numbers of the tracks which
come after the divided track will be
increased by one automatically.
Notes:
● When a track that has a name is divided,
the two new tracks will have the same
name. However, in the TOC FULL con-
dition, the second track may not be
named.
● Each disc can hold up to 255 tracks.
However, even if the number of assigned
tracks has not reached 254, it might not
be possible to make any further divisions
of tracks.
(Checking the
movement) (To move it to the
third track)
To move the fifth track
To divide the fourth track
(Confirming the split)
1 2
3 4
3
* MD-MT20H FOR UK(22-42) 99.3.11, 2:30 PM 29