Sharp MD-MT20H User Manual
Page 20
19
■
To erase tracks
To erase tracks one at a time:
1
Start playing the track you want to erase,
and press the
06
button.
●
The unit will enter the pause mode.
2
Press the EDIT button to select
“ERASE”.
3
Press the ENTER/SYNC button.
●
To cancel the operation, press the
■
/:OFF button.
4
Press the ENTER/SYNC button again.
●
The track will be erased.
5
To erase other tracks, repeat steps 1 -
4.
To erase all of the tracks at once:
1
Whilst in the stop mode, press the
EDIT button to select “ALL ERASE”.
●
“ALL ERASE” can also be selected
by holding down the EDIT button for
at least 2 seconds.
2
Press the ENTER/SYNC button.
●
To cancel the operation, press the
■
/:OFF button.
3
Press the ENTER/SYNC button again.
●
All of the track numbers, track names,
and disc names will be erased.
Notes:
●
Once a track has been erased, it can-
not be recovered. Double-check the
track number before erasing it.
●
When a track is erased, the numbers as-
signed to the tracks following the erased
track will be automatically decreased by
one.
●
When a track is erased, the track name
will be erased at the same time.
Number of the
paused track
1
2
3
4
1
2
* MD-MT20H FOR UK(01-21)
99.3.11, 2:29 PM
20