About track numbers – Sharp MD-MT20H User Manual

Page 21

ABOUT TRACK NUMBERS

When recording from analogue inputs:
(Including digital inputs other than
CDs or MiniDiscs)

A new track number will automatically be
created whenever 1 second or more of si-
lence occurs in the source.
(Auto marker function)

When recording, track numbers will be
created automatically.
(Auto marker function/Synchro marker
function)

●

If there is some noise in the “silent”
spaces from the source, the track num-
bers may not be created at the correct
position, depending on the contents of
the source being recorded.

●

You can also record a series of tracks
without using the auto marker function.

When recording from digital inputs:
(CDs/MiniDiscs only)

Track numbers will be created automatically
for each track at the same point where track
numbers already exist on the CD or
MiniDisc.
(Synchro marker function)

●

The track numbers on the playback side
may not match the track numbers re-
corded on the MiniDisc.

●

When recording, if a programmed play-
back is performed by the source or play-
back is performed by selecting tracks
manually, the MiniDisc track numbers
may not be the same as on the source.

●

The track numbers can also be changed
after recording.

●

Track numbers may not be created,
even when recording from digital inputs,
depending on the CD player used for the
source.

Playback
side

Silence

Second
track

About 1
second

First
track

Recording
side

Playback
side

Recording
side

First track

Second track

Third track

Track A

Track B

Track C