Sharp MD-MT20H - Manual (Page 23)

BASS 1
BASS 2
BASS 3
BASS OFF
22
PLAYING A MINIDISC
1
Insert the earphones plug firmly into the
earphones socket on the remote con-
trol unit.
2
Plug the remote control unit into the
socket on the main unit. Push the plug
all the way in.
● Since the remote control unit plug has
only one correct orientation, plug it in
as shown in the drawing.
3
Insert a MiniDisc. (See page 11.)
● The power will be turned on automati-
cally, and playback will start from the
first track. (Auto-play function)
● After playback of the last track has fin-
ished, the unit will stop automatically.
Playback does not start when a
MiniDisc is inserted:
Press the
06
button.
In the following cases, the auto-play func-
tion will not work.
● When the recordable MiniDisc write
protection tab is closed (page 10)
● When the auto-play function has been
cancelled (page 36)
4
Press the VOLUME + button to increase
the volume and the VOLUME – button to
decrease the volume.
5
Adjust the bass level.
When the BASS button is pressed once,
the current setting will be displayed.
Each time the BASS button is pressed,
the tone will be switched as follows:
● When recording, it is impossible to ad-
just the bass level (Bass emphasis is
cancelled).
● The most recent volume or bass set-
tings are saved when the power is
turned off.
Bass sounds are emphasised
slightly.
Bass sounds are emphasised
more.
Bass sounds are emphasised
even more.
Bass emphasis is cancelled.
Volume (0 - 30)
To the
socket
For the For the
left
right
(L) (R)
Remote
control unit
Earphones
Track number
Track name
(Nothing will be displayed for MiniDiscs
that do not contain track names.)
Continued to the next page.
* MD-MT20H FOR UK(22-42) 99.3.11, 2:30 PM 23