Sharp MD-MT20H - Manual (Page 17)

16
CONVENIENT RECORDING FUNCTION
■ Creating marks whilst making a
mic recording (Timed auto mark
function)
Marks can be created at a fixed interval
(every 5 minutes is the default setting) so
that the beginning of any track can be found.
The interval at which marks are created can
be changed by the user.
Whilst in the recording stand-by mode or
whilst recording, press the EDIT button.
● Each time the button is pressed, the set-
ting will change as follows:
● The time between marks may vary
slightly when compared with the actual
recording time.
About the timed auto mark:
Whenever a recording begins, a track num-
ber will be created automatically.
● : Track number which is created
when a silence lasts for 3 seconds or
more during synchro recording.
● : Track number which is created
by the timed auto mark function.
Example when the setting is for “5 min-
utes”:
When making a mic synchro recording
If a silence lasts for 3 seconds or
more, a timed auto mark will be
created 5 minutes after the previ-
ously created track number.
● A timed auto mark will be created ev-
ery 5 minutes.
2 minutes 5 minutes 1 minute 5 minutes
5 minutes 5 minutes 5 minutes
When the setting is changed to 10
minutes whilst recording, a timed auto
mark will be created 10 minutes after
the change is made.
3 minutes 10 minutes 10 minutes
When the timed auto mark setting has
been changed
(A mark is created
every 5 minutes.)
(A mark is created
every 3 minutes.)
(No marks are
created.)
(A mark is created
every 10 minutes.)
When making a mic manual recording
Track
number 1 Track
number 2 Track
number 3 Track
number 4 Track
number 5
Track
number 1 Track
number 2 Track
number 3 Track
number 4
Track
number 2 Track
number 1
* MD-MT20H FOR UK(01-21) 99.3.11, 2:29 PM 17