Network interface card – Samsung ML-1651N User Manual
Page 169

Network Interface Card
Review the precautions on page H.1 and then follow this procedure to install the Network card
option in your printer.
1
Unpack the network printer card. You
should find the following items.
2
Turn the printer power off and unplug
all cables from the printer.
3
Remove the two screws on the back of
the printer, then remove the control
board cover. See the figure on page H.2.
4
Remove the two screws, then remove
the plate.
Network card
(PortThru)
User’s guide
CD-ROM
(SyncThru)
H.4
P
RINTER
O
PTIONS
5
Align the connector on the network card
with the connector on the control board.
Push the card firmly into the connector
until it is completely inserted in place.
This manual is related to the following products: