Samsung ML-1651N - Manual (Page 114)

P
ROBLEM
S
OLVING 7.23
Troubleshooting Error Messages
Paper is jammed inside the printer.
• Clear the paper jam. See “Clearing Paper Jams” on page 7.7.
Paper jam
The printer ran out of memory in the middle of a print job. The page
being printed may have been too complex for the memory capacity of the
printer. Press the Cancel/Reprint button to cancel the current job.
• Turn the printer power off and back on to remove any unnecessary fonts,
macros, or any data currently in printer memory.
• Add more printer memory. See “Memory and PostScript DIMMs” on page H.2.
• For a temporary solution, simplify the image or print at a lower resolution.
Memory out (Insufficient Memory)
The printer top cover may be opened or the toner cartridge is not
installed.
• Check that the printer top cover door and rear door (face-up output tray)
are closed properly.
• Make sure that the toner cartridge is correctly installed in the printer.
• Remove the printed papers, if overstacked, from the top output tray.
Door open, no toner cartridge, or outputbin full
While printing in the manual feed mode, the printer is out of paper in
the Multi-Purpose Tray.
• Load the correct paper into the Multi-Purpose Tray and press the Demo
button on the control panel to print each page.
Paper out in the manual feed mode