Schneider Optics Web Embedded Server - Manual (Page 28)

Installing and Configuring the Module
18 840 USE 115 00 Version 1.0
2.2.3 Connecting the Cable
Twisted Pair If you are using twisted pair cable, Modicon recommends Category 5, which is
rated to 100 Mbps. Use RJ-45 connectors. Slip the connector into the port. It should
snap into place.
Fiber Optic Use 62.5/125 fiber optic cable with ST-style connectors. Modicon sells a 3 m cable
with connectors (990 XCA 656 09).
Remove the protective plastic coverings from the cable ports and the tips of the
cable. Snap one of the fiber cable clasps onto the cable, carefully pressing the
cable through the slot so that the wider end of the clasp is closest to the boot.
The key to installing the cable is to align the barrel, the locking ring and the
connector.
Figure 11 Attaching the Fiber Cable Clasp to the Cable
Cable Boot Fiber Cable Clasp
Figure 12 Aligning the Key and Locking Ring
Barrel
Locking Ring Lock
Arrow
Key
Groove