Siemens Mobile - Manual (Page 47)

©
Siem
ens AG
2003, M
:\Mobi
l\R65
\CF62_TMO\en\sug\A65_
Setup
.f
m
47 Settings
VAR Langua
ge: en; V
A
R issue
date: 040413
left page (47) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)
Illumination
The illumination for the color display
and the 2nd display can each be set
independently.
Color Display
Set display light brighter/darker.
The darker the setting the longer the
standby time.
2nd Display
Switch the display light on or off.
Contrast
Set color display contrast.
Dynamic Light
§Menu§
K m K
Dynamic Light
K
Select function.
The dynamic light consists of 7 LEDs
at the edge of the keyboard
(page 12).
It is used to indicate visually different
events and functions, as well as the
current phone status (e.g. network
searching, battery low, etc.).
You can set the visual signal (LEDs)
on the phone for certain functions
and events. The LEDs then flash in
different rhythms depending on the
current function.
You can also create your own flash
rhythms.
Show Light Effects
This enables you to switch the visual
signal on and off centrally for all
functions and events.
Play Demo
All flash rhythms are displayed in
sequence. End with §Cancel§ . Show
next flash rhythm with §Next§ .
Brightness
This enables you to set the bright-
ness for the visual signal.
d
Calls, Group Calls, Other Calls
You can assign different flash
rhythms to the relevant call types
and to each group.
During Call
Select a flash rhythm to flash during
the call.
Alarms
Select a flash rhythm to signal an
alarm or appointment.
More Light...
Set the flash rhythm for other
functions or events:
Incoming messages , Missed Event ,
During Sending , Opening Clamshell ,
Closing Clamshell , Net Search ,
Screensaver , Low Battery , Switch On ,
Switch Off , Charging