beautypg.com

A d g – Siemens Mobile User Manual

Page 17

background image

©

Siem

ens AG

2003, M

:\Mobi

l\R65

\CF62_TMO\en\sug\A65_

Startup.fm

17

Getting started

VAR Langua

ge: en; V

A

R issue

date: 040413

left page (17)

of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)

Do not short circuit the battery. Acci-

dental short-circuiting can occur

when a metallic object (coin, clip or

pen) causes direct connection of the

+ and – terminals of the battery

(metal strips on the back of the bat-

tery) for example when you carry a

spare battery in your pocket or

purse. Short-circuiting the terminals

may damage the battery or the con-

necting object.
Leaving the battery in hot or cold

places, such as in a closed car in sum-

mer or winter conditions, will reduce

the capacity and lifetime of the bat-

tery. Always try to keep the battery

between 15 °C and 25 °C (59 °F and

77 °F). A phone with a hot or cold

battery may be temporarily inopera-

ble, even when the battery is fully

charged.
Do not dispose of batteries in a fire!

Explosion may result.
Batteries must be disposed of prop-

erly. Comply with all local laws or

regulations in disposing of your

battery.

Charge icon not visible
If the battery has been fully dis-

charged, the charge icon is not

immediately visible when the power

supply unit is plugged in. It will

appear after up to two hours. In this

case the battery, is fully charged

after 3–4 hours.
Only use the power supply unit provided!
Display while in service
Charge level display during opera-

tion (empty – full):

a d g

A beep sounds when the battery is

nearly discharged. The charge level

of the battery is only displayed cor-

rectly after an uninterrupted charg-

ing/discharging cycle. You should

therefore not remove the battery unnec-

essarily

and if possible not terminate

the charging process early

.

Note
Use the battery only for its intended

purpose.
Never use any charger or battery that is

damaged or worn out.

Additional information
The power supply unit heats up when it is

used for long periods. This is normal and

not dangerous.
If the battery is removed for longer than

30 seconds, the clock will be reset.