Standard Horizon CPV550 - Manual (Page 74)

Page 74 CPV550
14. ADVANCED SETTINGS
The Advanced Setup menu allows customization of many GPS functions, Alarms and
NMEA interfacing.
1. From the chart page, press the [MENU] key twice. Move the ShuttlePoint knob to
highlight ADVANCED SETUP and press [ENT]or move the ShuttlePoint knob to the
right.
Figure 14 - Advanced Settings Menu
While in this menu you will see many selections which are described in the next sections.
14.0 INPUT/OUTPUT (NMEA)
The INPUT/OUTPUT CONNECTION allows the CPV550 NMEA inputs and output Ports
to be changed.
The NMEA input Ports can be selected to allow a
- NMEA device - select NMEA 0183 4800-N81-N
- FF520 connected, selected FF520
- Radar antenna connected, select Radar
- AIS reciever is connected, select AIS 38400
- the port may also be disabled.
The NMEA Output Ports can be selected to enable or disable the following NMEA
Sentences:
GLL, VTG, BWC, WCV, APA, APB, HDG, BOD, XTE, RMA, GGA, HSC, DBT, DPT, MTW
and VHW.
Figure 14.0 - IN/OUT CONNECTIONS Menu