1 additional functions on chart page, 2 turning off information on icon points, 3 display mode – Standard Horizon CPV550 User Manual
Page 66
Page 66
CPV550
13.0.1 Additional Functions on Chart page
When on the Chart page you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations and Port Icons. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon.
13.0.2 Turning Off Information on Icon Points
The GPS Chart Plotter allows you to select to see information on points, all items or to turn
this function off.
1. From the chart page, press the [MENU] key twice. Move the ShuttlePoint knob to
highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight AUTO INFO and press [ENT] or move the
ShuttlePoint knob to the right.
3. Select the Off, On Points, or On ALL and press [ENT] or move the ShuttlePoint knob
to the right.
4. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page appears.
13.0.3 Display Mode
Selects from a predefined table what cartographic objects are displayed and which display
options are set. Preprogrammed settings are user selectable from Full, Medium, Low,
Radar (reduces the information on the display to simulate items that would be shown on a
RADAR display). Please note this function is not actually showing RADAR information it is
only showing what typically would be shown by a separate dedicated RADAR display),
Tides, Custom (default mode). The table below shows the selections for each mode.
1. To change to one of the preprogrammed settings, press [MENU] twice. Move the
ShuttlePoint knob to highlight MAP CONFIGURATIONS and press [ENT] or move the
ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight DISPLAY MODE and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob up or down to select the preset and press [ENT].
4. Press [CLR] or move the ShuttlePoint knob to the right until the Chart page is shown.
Setting
Full
Medium
Low
RADAR
Tides
Custom
(Default values)
Place Names
On
On
On
On
On
On
Name Tags
On
Off
Off
Off
Off
On
Nav Aids & Light Sectors
On
No Sector
No Sector
No Sector
Off
On
Attention Areas
On
On
Off
Off
Off
Off
Tides & Currents
On
Off
Off
Off
On
On
Seabed Type
On
Off
Off
Off
Off
On
Ports & Services
On
On
Off
On
Off
On
Tracks & Routes
On
Off
Off
Off
Off
On
Depth Range Min
0 Ft
0 Ft
0 Ft
0 Ft
0 Ft
0 Ft
Depth Range Max
32805 Ft
32805 Ft
32805 Ft
32805 Ft
32805 Ft
32805 Ft
Land Elevation
On
Off
Off
Off
Off
On
Land Elevation Values
On
On
Off
Off
Off
Off
Roads
On
Off
Off
Off
Off
On
Points Of Interest
On
Off
Off
Off
Off
On
Lat/Lon Grid
On
Off
Off
Off
Off
Off
Chart Boundaries
On
Auto
Off
Off
Off
Off
Value-Added Data
On
Off
Off
Off
Off
On
Chart Lock
On
On
On
On
On
On
Mixing Levels
On
On
On
On
On
On
Underwater Objects Limit
1000 Ft
32 Ft
32 Ft
32 Ft
32 Ft
10 Ft
Rocks
Icon + Depth
Icon
Icon
Icon
Icon
Icon