Document history – Sierra Wireless AIRPRIME WISMO218 User Manual
Page 4
WA_DEV_W218_PTS_002
Rev 006
April 29, 2010
4
Product Technical Specification &
Customer Design Guidelines
Consult our website for up-to-date product descriptions, documentation, application notes, firmware
upgrades, troubleshooting tips, and press releases:
Document History
Version
Date
Updates
001
April 22, 2009
Creation
002
April 28, 2009
Addition of Power Consumption table and software note in section 3.3.2
003
July 17, 2009
Document Cover/Footer: Updated the file name (from
WA_DEV_W218_PTS_002-002 to WA_DEV_W218_PTS_002-003), the
revision number and the revision date.
Throughout the document: adjusted figure size to better display
components and their corresponding values.
§ 1.1.1: Updated the 4
th
reference document name to Customer Process
Guideline for WISMO Series.
§ 3.5: Changed the section title to “SPI Bus for Debug Trace ONLY”.
§ 3.5.1:
Changed the SPI-CLK Pin number from 16 to 15
Added an additional sentence at the end of the paragraph text
§ 3.5.1.1: Changed the value of X101 from 3.6884MHz to 3,6864MHz.
§ 3.11.2: Changed the PWM1 Pin number from 27 to 35.
§ 3.12.3: Updated the section description.
§ 5.2.2: Changed the Recommended connection when not used column
for Pin 18, TX_CTRL from “2.8V TX Burst Indicator” to “not connected”.
§ 5.4: Updated the description for Class B condition.
§ 5.5.2:
Updated the section description
Deleted Figure 40: Recommended PCB landing pattern for WISMO218
§ 5.5.3: Added this section.
Made grammatical and other punctuation corrections throughout the
document.
Updated links and references.
§ 3.8: Changed the number of General Purpose I/Os from 11 to 3.
§ 3.9.2 Added a Caution box after the table.
§ 3.10.4.1.1 and 3.104.1.2: Removed the GND within the WISMO218 in
the figures (figures 15, 16, 17 and 18)
§ 3.10.5.5: Added additional information in the Caution box regarding the
ESD sensitivity of the audio interface.
§ 5.2.2: Changed the recommended connection when not in use value
from “open” to “Ground” for pin #5, AUX-ADC0.
§ 3.10.5.5:
Separated the audio track figure and the differential connection figure
Labeled the differential connection figure as Figure 21
Added Figure 22: single-ended audio connection
§ 5.4: Updated the Class B temperature range from -30 to +75 to -40 to
+85.