Sierra Wireless AIRPRIME WISMO218 - Manual (Page 100)

WA_DEV_W218_PTS_002 Rev 006 April 29, 2010 100
9. Appendix
9.1. Safety Recommendations (for Information
Only)
For the efficient and safe operation of your GSM application based on the AirPrime WISMO218,
please read the following information carefully.
9.1.1. RF Safety
9.1.1.1. General
Your GSM terminal is based on the GSM standard for cellular technology. The GSM standard is
spread all over the world. It covers Europe, Asia and some parts of America and Africa. This is the
most used telecommunication standard.
Your GSM terminal is actually a low power radio transmitter and receiver. It sends out and receives
radio frequency energy. When you use your GSM application, the cellular system which handles your
calls controls both the radio frequency and the power level of your cellular modem.
9.1.1.2. Exposure to RF Energy
There has been some public concern about possible health effects from using GSM terminals.
Although research on health effects from RF energy has focused on the current RF technology for
many years, scientists have begun research regarding newer radio technologies, such as GSM. After
existing research had been reviewed, and after compliance to all applicable safety standards had
been tested, it has been concluded that the product was fit for use.
If you are concerned about exposure to RF energy there are things you can do to minimize exposure.
Obviously, limiting the duration of your calls will reduce your exposure to RF energy. In addition, you
can reduce RF exposure by operating your cellular terminal efficiently by following the guidelines
below.
9.1.1.3. Efficient Terminal Operation
For your GSM terminal to operate at the lowest power level, consistent with satisfactory call quality:
If your terminal has an extendible antenna, extend it fully. Some models allow you to place a call with
the antenna retracted. However, your GSM terminal operates more efficiently with the antenna fully
extended.
Do not hold the antenna when the terminal is « IN USE ». Holding the antenna affects call quality and
may cause the modem to operate at a higher power level than needed.