Sierra Wireless AIRPRIME WISMO218 - Manual (Page 82)

WA_DEV_W218_PTS_002 Rev 006 April 29, 2010 82
Product Technical Specification &
Customer Design Guidelines Consumption Measurement Procedure
4.2. Software Configurations
This section discusses the software configuration for the equipment(s) used and the AirPrime
WISMO218 settings.
4.2.1. AirPrime WISMO218 Configuration
The AirPrime WISMO218 software configuration is simply performed by selecting the operating mode
to be used to perform the measurement.
A description of the operating modes and the procedure used to change the operating mode are given
in the appendix of document [2] AirPrime WISMO218 AT Commands Manual.
An overview of the AirPrime WISMO218 operating modes is given below:
 OFF Mode
 Alarm Mode
 Idle Mode
 Connected Mode
 Transfer Mode
class 8 (4Rx/1Tx) (in GPRS mode)
 Transfer Mode
class 10 (3Rx/2Tx) (in GPRS mode)