Scag Power Equipment MAG - Manual (Page 18)

16
Figure 4-11 Mower Cutting Height Gauge
4.15 TILTING THE MOWER DECK
1. Stop the traveling movement of the mower and engage
the blade brake.
2. Use the deck tilt control switch on the instrument panel
to raise the deck.
3. Before lowering the deck, observe that there are no
objects under the deck. Remove any objects then,
activate the deck tilt switch to lower the deck.
Do not tilt the deck with the mower blades
rotating. Engage the blade brake before tilting
the deck. Bodily injury or damage to the mower
or property could result.
CAUTION:
Section 4
1
2
3
4