Set (setup) – Sony R5 User Manual
Page 36
36
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
SET (Setup)
DSPL (Display)
P/M (Play Mode)
SND (Sound)
EDIT
*1
When the unit is turned off.
*2
The default setting differs, depending on the
model:
PAL: Asian model
NTSC: Latin American model
*3
MEX-R5 only.
*4
When the illumination control lead is connected.
*5
When the unit is turned on.
*6
When a disc is played back.
*7
When auxiliary equipment is connected and
played.
CLOCK-ADJ
(Clock Adjust) (page 8)
BEEP
To set “ON” (
z
) or “OFF.”
RM
(Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “NORM” (
z
): to use the rotary commander in
the factory-set position.
– “REV”: when you mount the rotary
commander on the right side of the steering
column.
AUX-A
*
1
(AUX Audio)
To turn the AUX source display “ON” (
z
) or
“OFF” (page 38).
PAL/NTSC
*
1
*
2
To change the TV colour system to PAL or
NTSC.
WL
*
1
*
3
(Wireless)
– “CH1” (
z
), “CH2,” “CH3,” “CH4”: to avoid
interference with the wireless transmission.
– “OFF”: to turn off the wireless transmission.
CLOCK
(Clock Information)
To display the clock and the display items at the
same time.
– “ON”: to display at the same time.
– “OFF” (
z
): to not display at the same time.
DIM
(Dimmer)
To change the brightness of the display.
– “AT” (
z
): to dim the display automatically
when you turn the lights on.*
4
– “ON”: to dim the display.
– “OFF”: to deactivate the dimmer.
CONTRAST
To adjust the contrast of the main unit display.
The contrast level is adjustable in 7 steps.
M.DSPL
*
5
(Motion Display)
To select the Motion Display mode.
– “SA” (
z
): to show moving patterns and
spectrum analyzer.
– “ON”: to show moving patterns.
– “OFF”: to deactivate the Motion Display.
DEMO
*
1
(Demonstration)
To set “ON” (
z
) or “OFF” (page 8).
A.SCRL
(Auto Scroll)
To scroll long displayed items automatically
when the disc/album is changed.
– “ON”: to scroll.
– “OFF” (
z
): to not scroll.
LOCAL
(Local seek mode)
– “ON”: to only tune into stations with stronger
signals.
– “OFF” (
z
): to tune normal reception.
MONO
(Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– “ON”: to hear stereo broadcasts in monaural.
– “OFF” (
z
): to hear stereo broadcast in stereo.
EQ7 TUNE
HPF
(High Pass Filter)
To select the front/rear speaker cut-off
frequency: “OFF” (
z
), “78HZ” or “125HZ.”
LPF
(Low Pass Filter)
To select the subwoofer cut-off frequency:
“OFF” (
z
), “125HZ” or “78HZ.”
LOUD
(Loudness)
To enhance bass and treble at lower volume.
– “ON”: to reinforce bass and treble.
– “OFF” (
z
): to not reinforce bass and treble.
DVD LVL
*
6
(DVD level) (page 23)
To set the audio output level according to the
recorded DVD audio format.
AUX LVL
*
7
(Auxiliary level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
NAMEEDIT
NAME DEL
BTM