Smeg A3 - Manual (Page 31)

Instructions for the user
69
10.2.2 Barbecue drip tray
To remove the drip tray under the
barbecue element:
1.
Remove the griddle as described
in point 10.2.1;
2. Raise the heating element and fix
it in place by sliding the retainer to
the right (as shown in the adjacent
diagram);
3. Remove the drip tray using the
two
handles and clean using
specific detergents for stainless
steel and a non-abrasive sponge.
10.2.3 Grids
Remove the right-hand pan stands (griddle + fish burner) as shown in the
diagram.
There is no special order for removal of the left-hand pan
stands. Clean the pan stands in warm water and non-abrasive detergent,
taking care to remove all deposits. Replace, fitting first the outside pan
stand then the griddle.
10.2.4 Burner caps, flame cap crowns and burners
The burner caps, flame cap crowns and burners are
extractable to facilitate cleaning. Wash them with hot
water and non-abrasive detergent, taking care to
remove
incrustation, and leave them to dry
completely. Reassemble the burner caps on their
crowns, ensuring that niches A are centred with
burner pins B.