Samsung SV-661B - Manual (Page 33)

options might vary depending on your region of the world.) If the projector is
unable to detect the correct standard, the colors might not be displayed
correctly or the image might appear broken. If this happens, manually select a
standard by clicking the left or right mouse button and cycling through the
standards.
Standby time
Use this option to select how long the lamp stays on and the blank screen is
displayed when the projector enters standby mode before the projector turns
off. Select among instant, 1, 5, 10, 15, and 30 minutes, and 1 and 2 hours by
clicking the left or right mouse button and cycling through the options.
Ceiling projection
When you turn Ceiling Projection on, the projector turns the image upside
down for ceiling-mounted projection. Highlight Ceiling Projection, then click
the left or right mouse button to turn this feature on and off.
Rear projection
When you turn Rear Projection on, the projector reverses the image so that
you can project from behind a translucent screen. Highlight Rear Projection,
and then click the left or right navigation button to turn this feature on and
off.
Default source
Use the Default source to select among Computer 1 analog, Computer 1
digital, Computer 2,
and Video. This determines which source the projector
checks first for active video during power-up. Highlight Default source and
click the left or right mouse button to change among the options.
Auto source select
Use this setting to select between On and Off. When this feature is off, the
projector defaults to the source that is selected in Default source. To display
another source, you must manually select one by pressing the source button
on the keypad or the computer or video button on the remote control. When
this feature is on, the projector automatically finds the active source, checking
the default source first. Highlight Auto source select and click the left or right
navigation button to turn this feature on and off.
Installation and user’s guide 23