Sherwood BDP-6003 User Manual

Page 21

Connections

1 If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the

rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. If
using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the
rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2 Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT

terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN
terminal of your TV as described on pages 14 to 17.

3 Turn on the Blu-ray Disc Player, TV and Amplifier.
4 Press the input select button of the Amplifier to select the external input in order to hear sound from

the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

Connecting to an AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER)

Back of the player

Amplifier

NOTE

• The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your

Amplifier.

• When using this connection, Blu-ray Discs with an LPCM audio soundtrack will only be heard over the front two

channels.

BDP-6003-English

2008.12.5

6:19