Sony KP 48S75 User Manual
Page 44
– 44 –
KP-43T75/48S75/
53N77/53S75/61S75
RM-Y906
[GREEN REGISTRATION ADJUSTMENT]
1. Select GRN CENT
1and 4 keys on the remote commander.
2. Adjust the center of crosshatch line goes the middle vertically
and horizontally (GRN CENT) with the joystick on the remote
commander.
1. Select GRN SKEW with the
1and 4 keys on the remote
commander.
2. Adjust the crosshatch line goes straight vertically and horizon-
tally with the joystick on the remote commander.
1. Select GRN PIN with the
1and 4 keys on the remote
commander.
2. Adjust the crosshatch line goes straight horizontally with the
joystick on the remote commander.
1. Press
9 key on the remote commander to shift to the fine
adjustment mode.
The green cursor (in the GRN mode) appears on the center of
the screen.
2. Use the
1and 4 keys or the joystick on the remote com-
mander, move the cursor (see below) everywhere you want to
adjust and adjust with the joystic keys on the remote com-
mander.
Marker movement by the
1 and 4 keys:
Press once the joystick the cursor turns green to white.
Then you can move the cursor up and down left and right every
where you want.
Press once the joystick the cursor stops and returns green, you
can adjust around the cursor.
3. Press
9 key on the remote commander to shift to the coarse
adjustment mode.
GRN
CENT
000
: Middle
000
GRN
SKEW
000
000
GRN
PIN
XXXX
000
Note : These are required when either severe miss-adjustment or
data loss occurred.