Samsung GT-P7300 - Manual (Page 81)

Connectivity
81
Set the static IP settings
›
Open the application list and select
1
Settings → Wireless
and networks → Wi-Fi settings.
Select an access point on the network list.
2
Select the drop-down menu next to
3
IP settings.
Select
4
Static.
Change the IP settings for the access point such as IP
5
address, Network prefix length, Gateway, DNS.
Select
6
OK.
Wi-Fi Direct
Learn to use the WLAN Direct feature to connect two devices
via a WLAN without requiring an access point.
Connect your device to another device
›
Open the application list and select
1
Settings → Wireless
and networks → Wi-Fi Direct settings → OK → Wi-Fi
Direct.
Select
2
→ Scan.
Select a device and then select
3
Connect.
When the owner of the other device accepts the
connection, the devices are connected.