My clié handheld keeps turning itself off, My clié handheld does not produce any sounds, The lcd display cannot be viewed properly – Sony PEG-TJ37 User Manual
Page 52
52
Sony Personal Entertainment Organizer PEG-TJ37/TJ37 3-088-727-12 (1)
My CLIÉ handheld keeps turning itself off
B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic
power-off). You can set the automatic power-off time by selecting time for [Auto-off
After:] in [General] of the
Preferences
screen.
• The maximum idle time is 3 minutes.
b
For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the automatic
power-off time” in the “Handbook” (PDF format).
B Did you set [After a preset delay] from [Auto Lock Handheld:] in the
Security
screen?
If you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ handheld may
turn off after a shorter period even if you set the automatic power-off time.
b
For details, refer to “Protecting your data with a password: Locking your CLIÉ handheld with
a password (Data protection)” in the “Handbook” (PDF format).
My CLIÉ handheld does not produce any sounds
B Is [System Sound:] in [General] of the
Preferences
screen set to [Off]?
b
For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting sounds” in the
“Handbook” (PDF format).
B Adjust the volume settings in the
Adjust Volume
dialog box displayed by tapping
in the
Status Info
dialog box (page 78).
Tip
If [Muting]* is selected in the
Adjust Volume
dialog box, all sounds, including audio, are
muted.
* [Muting] is available for PEG-TJ37 only.
b
For details, refer to “CLIÉ™ handheld components: Status Information” (
page 76
).
The backlight does not turn on when I adjust the
brightness level
B If the brightness is set to the lowest level, the display may be illegible. However, this
is not a malfunction.
The LCD display cannot be viewed properly
B Depending upon the angle of vision, the brightness may be uneven, however, this is not
a malfunction. You can adjust the brightness level in the
Adjust Brightness
dialog
box displayed by tapping
(page 74) at the bottom left of the Graffiti
®
2 writing
area. If the backlight is off, you can turn it on by sliding down the POWER/HOLD
switch and hold it for more than two seconds.
Notes
01US01COV.book Page 52 Monday, December 15, 2003 2:35 PM