Sony PEG-TJ37 - Manual (Page 19)

19
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 3-088-727-12 (1)
S
e
tt
ing u
p
your CLIÉ™ h
a
ndheld
Step 3: Connecting your CLIÉ handheld and
computer via the USB cable
You can synchronize data between your CLIÉ handheld and computer by
connecting them with the supplied USB cable after installing
Palm™
Desktop for CLIÉ .
About the USB cable
The supplied USB cable has two connectors. Connect the “A” plug to the USB
port of your computer and the mini “B” plug to the plug adapter.
1
Connect the mini “B” plug of the USB cable to the plug
adapter (1), then connect the plug adapter to the
interface connector of your CLIÉ handheld (2).
2
Connect the “A” plug of the USB cable to the USB port of
your computer.
Note
Make sure you connect the USB cable directly to a USB port of your computer.
If the USB cable is connected to a computer via another device, such as a USB
hub, the HotSync
®
operation may not work properly.
“A” plug mini “B” plug
To the USB port of
your computer
01US01COV.book Page 19 Monday, December 15, 2003 2:35 PM