Event recording mode – Samsung SHR-6040 User Manual

Page 61

appendix _

3. Recording Schedule Display:

Allows the user to schedule various recording modes

for individual cameras. Select a desired recording

mode and drag using the mouse to designate the

timeframe.

4. Recording mode:

Displays various recording modes that are available.

Select a desired recording mode and drag over to the

schedule line using the mouse to assign.

Continuous: Refers to continuous recording

regardless of an event occurrence.

motion Detection: Refers to recording only when

motion is detected.

Sensor: Refers to recording only when a sensor

(alarm-in) event is detected.

EVENT RECORDING mODE

event Recording Settings
This tab is used to configure each camera’s event

recording settings (frame rate, picture quality, resolution,

pre- and post-event recording durations).

1. Reset:

Resets all settings to their default values.

2. Frame Rate:

Used to configure event recording frame rate.

3. Picture Quality:

Used to configure the level of recording quality.

4. Resolution:

Used to configure the recording resolution.

5. Pre-event:

Used to configure the duration of recording leading up

to an event.

6. Post-event:

Used to configure the duration of recording following

an event.

Alarm Detection Settings
Alarm detection bases on sensor signals to trigger

recording and/or sound the alarm when an event is

detected.

1. Sensor Channel:

Select the sensor (alarm-in) you wish to configure.

2. Sensor mode:

Set sensor mode to N.O or N.C.

3. Camera:

Select the camera(s) you wish to assign to the selected

sensor. The selected camera(s) will start recording

when a sensor event occurs.

4. Alarm:

Used to configure the alarm to sound when a sensor

event is detected.

5. Duration:

Used to configure the event-triggered alarm duration.

SHR-6042_Eng.indb 57

2009-06-05 오전 11:23:52

This manual is related to the following products:

SHR-6042