Samsung SHR-6040 - Manual (Page 14)

10_ installation
installation
You should pay attention to the following before you use
the product.
 Do not use it outdoor.
 Do not place water or liquid near the connection part
or the product.
 Do not impose excessive shock or force.
 Do not pull out the power cord unreasonably.
 Do not disassemble the product on your own.
 Do not exceed the rated input or output voltage range.
 Use the certified power cord only.
 For the product with an input ground, use a power
plug with a ground pin.
CHECKING INSTALLATION
ENVIRONmENT
Samsung Digital Video Recorder (hereinafter referred to
“DVR”) is a high-tech security equipment that contains
a high-capacity HDD and top-notch circuits. High
temperature inside or outside of the product may reduce
the product life, deteriorate performance (see the Figure
1 below; it explains the correlation between temperature
and product life), and lead to a malfunction.
Please keep the following instructions for rack-mounting
the Samsung DVRs to proceed with the installation.
1. The rack on which the DVR is mounted should not
be sealed off.
2. And it also can allow air circulation through the vent.
3. As shown in the Figure 2, we recommend you to
heap the product with other DVRs or use rack-
mount devices at a certain space, or install a vent
system to accommodate airflow.
4. For forming a natural convection, the air intake
hole should be positioned at the bottom and the
emission at the top.
5. We recommend you to install each of the air intake
and emission holes with fan motors for sufficient
airflow. (The air intake fan should be equipped with
a filter to prevent possible inflow of dust and other
impurities.)
6. As shown in the Figure 1, the temperature inside the
rack and around the DVR should maintain between
5 and 45°C.
Figure 1
One Year: 24HR x 365 DAY =8,760 HR
Temperature
Unit: ºC
Life (Unit: HOURS)
Figure 2
SHR-6042_Eng.indb 10 2009-06-05 오전 11:23:32