Samsung SHR-6040 - Manual (Page 33)

05
m
eN
U
S
eT
U
P
menu setup _ 29
The selected channel appears within the PIP zone on the
right.
The adjustment can be made from ‘0’ to ‘255’ using the
 or  button.
If you press “ Apply All”, the values for the last updated
channel are copied to entire channels.
If you press “ Default”, the values for the current channel
are reset with ‘128’.
Remote Control Device
This window allows you to control the functions of DVR
by using the system controller keyboard (SSC-2000,
SSC-5000).
 ID
Selects the ID of the system controller keyboard.
 Baudrate
Selects the transmission speed of the system controller
(1200/2400/4800/9600/19200/38400).
Available System Controller Keyboard
NO manufacturer model Name
1 SAMSUNG SSC-2000,
SSC-5000
 The items above should match the settings
of the system controller keyboard. For further
information, refer to the manual provided by the
manufacturer of the system controller keyboard.
 This device supports only half duplex as a
transmission method.
mONITORING
The details of the monitoring menu are as follows:
Live Mode
 event monitoring Duration
It can be set to any of Off, 30 seconds, and
CONTINUE.
OFF: The event monitoring that switches to the event
screen does not operate.
30 Seconds: It sets the display duration of the current
channel until the next channel is displayed.
CONTINUe: The event monitoring screen will be
maintained until it is cancelled by pressing the ALARm
button on the front panel.
 OSD
Date: When it is On, the date will be displayed on the
screen. When it is Off, the date will not be displayed on
the screen.
Time: When it is On, the time will be displayed on the
screen. When it is Off, the time will not be displayed on
the screen.
Title: When it is On, the camera name will be displayed
on the screen. When it is Off, the camera name will not
be displayed on the screen.
State: When it is On, the Audio/PTZ will be displayed
on the screen. When it is Off, the Audio/PTZ will not be
displayed on the screen.
►
►
►
►
►
SHR-6042/6040 mENU
System ►
Camera ►
monitoring ►
Record mode
Event Record
►
Record Schedule
Backup
Network
►
move/Control Select Exit
Live mode
Spot mode
monitoring
Event monitoring
Off Duration
ON Date
ON Time
ON Title
ON State
OSD
OK Cancel
Remote Control Device
OK Cancel
ID
Baudrate
0
9600
move/Control Select Exit
SHR-6042_Eng.indb 29 2009-06-05 오전 11:23:40