Now you can see – SVAT Electronics CV0204DVR User Manual

Page 33

Text mode
Original mode

CV0204DVR

SVAT ELECTRONICS

Now You Can See

4. Select the Virtual Server tab.

• Enable the Virtual server

• In the Name field type in “DVR”

• In the Private IP field enter the DVR’s IP address.

• In the Protocol field, select Both (This will enable both TCP and UDP).

• In the Private port enter the port number you need to forward. By default this DVR is set

to port 80. Use port 80 unless you have a reason to change the DVR to another port (not

recommended).

• In the Public port re-enter the port number you entered in the private port field

(e.g. 80).

• Select the Schedule to Always.

• Ensure that the Virtual Server (or forwarding that is being set-up) is set to ENABLED.
When complete, select the Apply button located at the bottom of the page to save your

changes. Port forwarding is now complete!