Now you can see – SVAT Electronics CV0204DVR User Manual

Page 23

CV0204DVR

5.5 BUZZER SETUP

1. ALARM ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm

when motion event has been detected (this setup is only active when the system is

under record status and schedule record is setup to “M” (Mix).

2. VIDEO LOSS ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the

alarm when video loss has been detected (this setup is only active when the system

is under record or live status).

3. HDD FULL ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the

alarm when hard disk is full (this setup is only active when the system is under

record status).

4. BUZZER TIME: Press ENTER to setup the buzzer time to continuous (CONT), and

press any button to release this setup.

SVAT ELECTRONICS

Now You Can See