Swann DVR8-2500 - Manual (Page 6)

1
2
3
4
5
6
8
10
12
14
7
9
11
13
15
1. 0-9 (digit key pad)
- Buttons 1-4 can be used to view channels 1-4 in indi-
vidual display mode during recording and playback.
- 0-9 can be used to input a password.
- 0-9 cannot be used for any other numeric field with a
yellow pop up keypad
2. ALL
- Press to activate the entire screen for motion detection
in MOTION DETECTOR SETUP; press again to deactivate
motion detection to the entire screen.
3 - LEFT arrow
- Move cursor left in menus.
4. REWIND/RWD
- Press to rewind a recording during playback.
5. RECORD
- Press to begin recording.
Note: will not function if the cameras are not activated in
CAMERA SETUP AND RECORD SETUP.
6. MENU
- Used to enter the main menu or exit a sub menu.
7. UP arrow
- Move cursor up in menus.
8. SELECT/SEL
-Press to select an option/enter a sub menu.
9. RIGHT arrow
- Press to move cursor right.
10. DOWN arrow
-Press to move cursor down.
11. Mute
- Will not affect DVR operation.
12. PLAY
- Press to begin playing most recent recording during
playback.
13. FAST FORWARD/FWD
- Press to fast forward a recording.
14. STOP
- Press to stop a recording.
15. Pause
- Press to pause a recording.
Layout of Remote Control
6