SMC Networks SMC7004VBR V.2 - Manual (Page 35)

Advanced Setup
33
LAN
From this section, you can configure the TCP/IP configuration
for the Barricade™ LAN interface and DHCP clients.
•
LAN IP
Use the [LAN] menu to configure the LAN IP address for
the Barricade™ and to enable the DHCP server for dynamic
client addresses allocation. Set a period for the lease time
if required. For home networks, this may be set to "Forever",
which means there is no time limit on the IP address lease.
•
IP Address Pool
A dynamic IP start address may be specified by the user,
e.g. 192.168.2.100 (default value). In this example, the IP
addresses run from 192.168.2.100 to 192.168.2.199 which
will be part of the dynamic IP address pool. IP addresses
from 192.168.2.2 to 192.168.2.99, and 192.168.2.200 to
192.168.2.254 will be available as static IP addresses.
Note: Do not include the address of the Barricade™
in the DHCP client address pool.