SMC Networks SMC7004VBR V.2 - Manual (Page 16)

Configuring Windows XP
13
Configuring Windows XP
The following instructions assume you are running Windows XP
with the default interface. If you are using the Classic interface
(where the icons and menus look like previous Windows versions),
please follow the instructions for Windows 2000 outlined above.
1. Access your network settings by clicking [Start], choose
[Control Panel], select [Network and Internet Connections]
and then click on the [Network Connections] icon.
2. Locate and double-click the [Local Area Connection] icon
for the Ethernet adapter that is connected to the Barricade™
Router. Next, click the [Properties] button.
3. On the [Local Area Connection] Properties box, verify the box
next to [Internet Protocol (TCP/IP)] is checked. Then highlight
the Internet Protocol (TCP/IP), and click the [Properties] button.