Samsung SV-5000W - Manual (Page 25)

47
GB
46
Technical Specifications
Recording system Rotary head azimuth recording, luminance signal FM
recording system.
Chrominance signal down converted phase shift recording
system (NTSC, PAL, PAL-M).
Chrominance signal down converted direct recording
system (MESECAM).
Chrominance signal 1/4 frequency countdown direct recording
system (SECAM).
Color system NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM
Tuning system B/G, D/K, I, M, N
RF out M/G/I/K UHF 14-69, 116-125(M System only)
Tape recording/playback NTSC, PAL, PAL-M, SECAM, MESECAM
Tape speed NTSC 33.35mm/sec (standard recording : SP)
PAL-M 11.12mm/sec (three times recording : SLP)
PAL 23.39mm/sec (standard recording : SP)
MESECAM 11.69mm/sec (double speed recording : LP)
SECAM
Tape format VHS type video tape, S-VHS type video tape (Play back only)
Recording time Maximum 8 hours (with a T-160 tape/E-240)
Rewinding time Within 100 Seconds (high speed rewinding, T-120 or E-180 tape)
Video input 1.0Vp-p (unbalanced) 75 Ω
Video output 1.0Vp-p (unbalanced) 75 Ω
Video S/N Above 43dB (standard recording)
Resolution Above 220 (standard recording NTSC), 240 (standard recording PAL)
Audio input -8dBm, 47 Kohm unbalanced
Audio output -8 ± 3 dBm, 1 Kohm unbalanced
Audio S/N Above 39dB (Mono), 68dB (Hi-Fi)
Audio frequency characteristics 20Hz-20kHz
Rated voltage 100V~240V AC
Rated frequency 50/60Hz
Power consumption APP. 24 watts on recording; 8 watts off
Operating ambient temperature 41°F-104°F (5°C - 40°C)
Installation conditions Operation position : Horizontal, Relative humidity : Below 80%
Outside dimensions Width 430mm(16.9in) x Length 295mm(11.6in) x Height 98mm(3.86in)
Weight 4.3Kg(9.5 lbs)
If you find that your VCR is not operating correctly, or no
indications appear in the display, you can reset it.
1 Press the RESET button on the front panel with a pen or pencil, to
reset the VCR.
Result:
All preset data will be erased and will need to be
reprogrammed.
2 If the problem is not solved after you have reset the VCR, refer to
page 48 for a list of simple checks to be performed before
contacting an authorized service center.
Locking Your VCR
The playback functions on your VCR can be locked to prevent the
VCR from being used by young children.
You can still watch television programs via the VCR but you cannot
insert or play a cassette.
1 To lock the VCR, hold down the P/STILL ( ) button for
approximately five seconds.
Result:
The lock indicator ( LOCK ) is displayed.
➢
If a cassette is in the VCR when you lock it, the cassette will
be ejected.
2 To unlock the VCR, hold down the P/STILL ( ) button again for
approximately five seconds.
Result:
The lock indicator ( LOCK ) is no longer displayed.
Resetting Your VCR
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
1
1
2