Samsung SV-5000W - Manual (Page 19)

37
GB
The tape counter:
◆ indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
◆ is reset when a cassette is inserted in the VCR ; and
◆ enables you to find the beginning of a sequence easily.
☛
To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used. See
page 22.
1 Insert a cassette in your VCR.
2 Press CLK/COUNT twice.
Result:
The tape counter is displayed:
0:00:00 .
➢
The tape counter does not necessarily start from zero at the
beginning of the tape.
3 Select the required operation (play, record, fast-forward, rewind).
Result:
The tape counter indicates how long the cassette has
been running.
4 To set the tape counter to zero at the beginning of a sequence:
◆ press DISPLAY twice to display the counter ; and
◆ press CLR/RST when you want to set the tape counter to
zero.
5 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press REW (
) or F.F ( ).
Result: The VCR stops automatically when the counter
reaches zero.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).
Press DISPLAY:
◆ once to display the current function, program
number, recording speed, date, time and counter ;
◆ twice to display the counter only ;
◆ three times to display the time remaining on the
cassette ; and
◆ four times to clear the display.
VPS PDC
SLP VCR
L
AUTO
NTSC4.43
PAL-MN
MESECAM
CONVERSION
STROBE
ART
THROUGH
NTSC4.43
PAL-MN
MESECAM
OUTPUT INPUT PB DTR INDEX DUB SQPB DTR INDEX DUB Hi-F Hi-Fi
R
+10
+5
0
-10
-20
-30
-40
EX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
2 3
STROBE AUDIO
Using the Tape Counter
0:00:00
0
CLR/RST 100
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
2
4
4
36
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function enables you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows.
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
2 1 1 2
➞
➢
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
1 To search for a specific index, press INDEX.
2 Enter the number of the index to be found using the numeric
buttons.
➢
When entering a single-digit number, do not forget to
precede it with a zero.
Example: 02.
Result: The index number is displayed.
3 Select the direction in which the VCR is to search:
◆ REW ( ) to search backwards ; or
◆ F.F ( ) to search forwards.
Result: When the index is found, cassette playback starts.
INDEX: --
VCR
POWER EJ
INDEX REC.SPEED CLK/COUNT PICTURE T
1 2 3
STROBE A 1
0
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
3 3